Universal Storage Case, 20 x 14 x 12 in,
Fits: Most 2-Barrel & 4-Barrel Intake Manifolds
SB Mopar Engine Cradle Standard Duty
SB Mopar Engine Cradle Heavy Duty
BB Mopar Engine Cradle Heavy Duty
Standard Duty 3" Dia. Wheel Kit
Standard Duty 3" Dia. Locking Wheel Kit
Heavy Duty 3" Dia. Wheel Kit
Heavy Duty 3" Dia. Locking Wheel Kit
Heavy Duty 5" Dia. Wheel Kit
8' Standard Ratchet Binder
16' Heavy Duty Ratchet Binder
2" W. x 8' L. Tie Down, Flat Hook
2" W. x 8' L. Tie Down, Flat Hook
2" W. x 8' L. Tie Down, Twist Hook
2" W. x 8' L. Axle Combo Tie Down, Twist Hook
2" W. x 24" to 40" Adjustable L. Tie Back Axle Strap, Twist Hook
2" W. x 21" L. Axle Strap
2" W. x 33" L. Axle Strap
Finally! A wrench for adjusting sway bar nuts that will clear the radiator and frame rail. Blue anodized wrench is 3/8" thick with 5-1/2" arm, and 7" overall. Wrench jaw is rotated 30 degrees and fits 1-9/32" nuts.
Blue anodized wrench is 3/8" thick, and fits 1-3/32" jam nuts for 3/4" rod ends commonly used on trailing arms. Jaw is rotated 30 degrees, with an 8-3/4" overall length.
4-in-1 wrench has four different sizes to accommodate 3AN, 4AN, 6AN line fittings and 1-1/4" bottle fitting. Compact enough to fit in your pocket or glove box for quick bottle changes or to check lines at the track.
Steel Wrench, Upper Ball Joint
Steel Wrench, Short Panhard Bar 1-3/8
Roll Bar Padding, 36.0 in. Length, Offset Alignment, Non SFI- Approved, Each
This tool is a must when adjusting tension of quick turn springs. Simply turn knob on adjuster to evenly pull or push spring without kinking or breaking spring.
15" Straight Spout Funnel
Tire Gauge, Analog, 2 in. Diameter, 0-20 psi, 12 in. Hose, Stop Valve, Each
Tire Gauge, Analog, 2 in. Diameter, 0-40 psi, 12 in. Hose, Stop Valve, Each
Axle Spline Tool 31 Spline
Dial Calipers, 0.001 to 6.000 in Range, Stainless
Dial Calipers, Digital, 0.001 to 6.000 in Range, Stainless
Rod Guide Tool Extension for Big Blocks
