Mobile Navigation

Edelbrock Performer RPM Magnum Cylinder Head

Item #: EDE61775

Price: $1,191.99



Fits: 5.2, 5.9L

Cylinder Head, Performer RPM, Aluminum, Assembled, 58cc Chamber, 176cc Intake Runner, Dodge, Jeep, 5.2, 5.9L

Designed for 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum style V8s

Cylinder Head Style: Assembled

Cylinder Head Material: Aluminum

Cylinder Head Finish: Natural

Combustion Chamber Volume (cc): 58

CNC-Machined Combustion Chamber: No

Intake Runner Volume (cc): 176cc

Exhaust Runner Volume (cc): 75cc

CNC-Machined Intake Runner: No

CNC-Machined Exhaust Runner: No

Intake Port Location: Standard

Exhaust Port Location: Standard

Intake Valves Included: Yes

Intake Valve Diameter (in): 2.020 in.

Exhaust Valves Included: Yes

Exhaust Valve Diameter (in): 1.600 in.

Valve Springs Included: Yes

Maximum Valve Lift (in): 0.600 in.

Outside Diameter of Outer Spring (in): 1.460 in.

Damper Spring Included: Yes

Number of Springs Per Valve: Dual

Retainers Included: Yes

Retainer Material: Steel

Locks Included: Yes

Lock Style: 7 degree

Valve Stem Seals Included: Yes

Valve Stem Seal Style: Positive stop

Rocker Arm Studs Included: Yes

Rocker Arm Nut Thread Size: 3/8-24 in.

Rocker Arms Included: No

Rocker Arm Nuts Included: No

Guideplates Included: Yes

Guideplate Pushrod Size: 5/16 in.

Valve Cover Mounting Style: Perimeter bolt

Accessory Bolt Holes Drilled: Yes

Intake Valve Angle: 18

Valve Guides Included: Yes

Valve Guide Material: Manganese bronze

Valve Seats Machined: Yes

Valve Seat Machine Style: 3-angle

Valve Seat Material: Ductile iron

Steam Holes Drilled: No

Oiling Style: Through head

Machined for O-Ring: No

Heat Crossover: No

Quantity: Sold individually.

Notes: With springs for hydraulic roller cams, Requires hardened pushrods, EDL-9638. Match with Edelbrock head gasket sets. Recommended spark plugs 14mm x 3/4" reach with flat gasket seat (Champion RC12YC). Exhaust flanges in stock location to allow use of stock exhaust if desired. Accepts widely available small-block Chevy adjustable rockers 1.6 ratio and classic valve covers EDL-4177 and EDL-41773

These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.