PRODUCT DESCRIPTION
Fits: 5.7, 6.4L With VVT 2009+
Cam Style:
Hydraulic roller, OE roller
Basic Operating RPM Range:
2,000-7,200
Camshaft Use:
Off-Road/Street/Towing
Intake Duration at 050 inch Lift:
222
Exhaust Duration at 050 inch Lift:
230
Duration at 050 inch Lift:
222 int./230 exh.
Advertised Intake Duration:
275
Advertised Exhaust Duration:
278
Intake Valve Lift with Factory Rocker Arm Ratio:
0.599 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.604 in.
Valve Lift with Factory Rocker Arm Ratio:
0.599 int./0.604 exh.
Lobe Separation (degrees):
115
Camshaft Gear Attachment:
1-bolt
Computer-Controlled Compatible:
No
Lifters Included:
No
Lifter Style:
Hydraulic roller
Valve Springs Included:
No
Retainers Included:
Yes
Locks Included:
Yes
Valve Stem Seals Included:
No
Timing Chain and Gears Included:
No
Assembly Lubricant Included:
No
Pushrods Included:
No
Rocker Arms Included:
No
Gaskets Included:
No
Valve Springs Required:
No
Quantity:
Sold individually.
COMP Cams HRT Stage 2 Camshafts
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
Cam Style:
Hydraulic roller, OE roller
Camshaft Use:
Street/Strip
Camshaft Manufacturers Description:
Optimized fuel mileage with good torque and horsepower. Needs programmer.
Basic Operating RPM Range:
800-5,000
Intake Duration at 050 inch Lift:
194
Exhaust Duration at 050 inch Lift:
206
Duration at 050 inch Lift:
194 int./206 exh.
Advertised Intake Duration:
246
Advertised Exhaust Duration:
258
Advertised Duration:
246 in./258 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.470 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.464 in.
Valve Lift with Factory Rocker Arm Ratio:
0.470 int./0.464 exh.
Lobe Separation (degrees):
116
Remanufactured:
No
Computer-Controlled Compatible:
Yes
Grind Number:
TPX246HR-16
Valve Springs Required:
Yes
Quantity:
Sold individually.
Notes:
Fits engines without variable cam timing.
COMP Cams Tri-Power Xtreme Camshafts
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
